Plastic ic tray (low temperature board) as an integral part of warehousing industry, carry forward a serious role.
      Plastic ic tray (low temperature board) in accordance with the correct use of the standard use, not only can carry forward its own role, but also can extend its service life, reduce the cost of plastic tray sales.
      Plastic tray should pay attention to the following points:
      1. should be lightly put plastic tray, to prevent the landing when the uneven force, attack damage.
      2. When placing the goods, should be placed on average to prevent lifting movements, the onset side of the crooked.
      3. The use of handling equipment, should consider the size of the cargo can be appropriate to use this plastic tray to prevent the size is not appropriate, bear bad plastic tray.
      4. When stacking, use the load on the top of a tray.
      Proper use of plastic pallets should be done on the plastic tray with the appropriate packing and wrapping to facilitate the use of mechanical handling and transport to meet loading and unloading, transport and storage requirements. In order to make the plastic tray can be used for a long time safe, hope to use the following requirements of the correct use of plastic tray:
      1. Plastic ic tray (low temperature board) should be protected from sun exposure, so as not to cause aging, to extend the service life.
      2. Do not throw the goods from the height in the plastic tray. Reasonably determine the way the goods are stacked in the tray. The average placement of goods, not centralized stacking, fair stacking. The trays carrying heavy objects should be placed in flat air or on the outside of the object.
      3. It is forbidden to drop the plastic tray from the height to prevent the tray from breaking and cracking due to violent impact.
      4. Forklift or manual hydraulic vehicle operation, the fork as far as possible to the outer side of the tray fork by the foot, fork should be all into the tray, bumps after the tray can only change the angle. The fork can not hit the front of the tray to avoid the formation of the tray broken, crack.
      5. Plastic ic tray (low temperature board) on the shelf, you must use the shelf type tray, bearing capacity depends on the shelf structure, is strictly prohibited overload.
Master the correct plastic ic tray (low temperature board) the correct use of the method, you can add its life, for you to save a small fee.